Table of Contents
Advertisement
Always use the salt intended for use with dishwasher.
The salt container is located beneath the lower basket and should be filled as explained
in the foll owing:
Attention!
Only use salt specif ically de signed for the use in dishwashers! Every othe r type of
salt not specifically designed for the use in a dishwasher, espe cially t able sa lt, will
damage the water softe ner. I n cas e of da ma ges caused by the use of unsuitable
salt the manufacture r does not giv e any warranty nor is liable for any damages caused.
Only fill with salt jus t before starting one of the com plete washing progra ms .
This will prevent a ny grai ns of salt or salty water, which m ay have been spil led,
rem aining on the bottom of the machine for any period of time, which may cause
corros ion.
A
Remove the lower basket and then unscrew and remove the cap from the salt container.
B
Before the first wash, fill 1lt. of water in the salt container of your machine.
C
Place the end of the funnel (supplied) into the hole and introduce about 1kg of salt.
It is normal for a small amount of water to come out of the salt container.
D
After filling the container , screw the cap tightly back clockwise.
E
Usually, the salt warning light will stop being illuminated within 2-6 days after the salt container has been filled with
salt.
F
Immediately after filling the salt into the salt container, a washing program should be started
by salty water. This is out of warranty.
1. The salt container must only be refilled when the salt warning light in the control panel comes on.
Depending on how well the salt dissolves, the salt warning light may still b e on even though the
salt container is filled.
If there is no salt warning light in the control panel (for some Models),you can estimate when to fill
the salt into the softener by the cycles that the dishwasher has run.
2. If there are spills of the salt, a soak or a rapid program should be run to remove the excessive salt.
Rinse Aid Dispenser
The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can
leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is
designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser.
To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely
black. The volume of the rinse aid container is about 110ml.
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.
Attention!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other substances
(e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.
Otherwise the filter system, pump or other important parts of the machine may be damaged
5
Advertisement
Table of Contents
