Table of Contents
Advertisement
7. TCP/IP SETUP
TCP/IP option of Stand-alone DVR enables user to see live pictures and recorded pictures
via internet line, remotely from DVR. To see live pictures or recorded pictures of DVR,
users must assign a
Subnet mask. Then install Remote Viewer Software in client PC. For detail procedure for
installing Remote Viewer Software, refer to Remote Viewer Software installation procedure.
SYSTEM SETUP
DISPLAY
CAMERA TITLE
TIME/DATE
ALARM/MOTION
RECORD SETUP
TCP/IP SETUP
MISCELLANEOUS
FACTORY
(1)IP ADDRESS : Enter numbers using
(2)GATEWAY : Enter numbers using
(3)SUBNET MASK : Enter numbers using
(4)MAC ADDRESS : It is unique ID number provided by the manufacturer, and the user
should not change under any condition. When modified, it can collide with other systems
in the Internet line and cause problems in operation. Make sure this number remains
unchanged.
static IP address
《
IP ADDRESS
GATEWAY
SUBNET MASK
MAC ADDRESS
SETUP
SETUP
SETUP
SELECT
DEFAULT
button and press MENU
33
》
into DVR together with Gateway and
TCP/IP
SETUP
, PRESS
button and press MENU
button and press MENU
1
2
3
4
Advertisement
Table of Contents
