Table of Contents
Advertisement
6. RECORD SETUP
SYSTEM SETUP
DISPLAY
SETUP
CAMERA TITLE
TIME/DATE
SETUP
ALARM/MOTION
SETUP
RECORD SETUP
TCP/IP SETUP
MISCELLANEOUS
FACTORY
DEFAULT
(1) HDD CLEAR : If YES is selected, it deletes content of the HDD.
All contents of the HDD is deleted and cannot be restored.
As times go by, HDDs in a DVR unit may develop bad sectors.
This DVR model compensates for bad sectors in hard disk drives.
(2)HDD FULL : Select OVERWRITE or STOP RECORD. If OVERWRITE is selected, it
deletes previous contents on HDD to overwrite when HDD is full.
(3)RECORD MODE
1
TIMER : Records by time.
2
T IMER+ALARM : Records by time or when the ALARM comes in. (POST -ALARM Functionality)
3
MOT ION : Records only when MOTION is detected.
4
MOTION+ALARM : Records by MOT ION or when the ALARM comes in.
(4)RECORD TYPE
1
FIELD : Records images from each camera in rotation
60 fields/sec at 720X240 resolution
Selected for higher resolution recording.
total 60 fields/sec.
2 2
Select for moving picture level recording.
(5)RECORD SPEED : Adjusts recording frame rate : 0.1 indicates 1 field per 10
seconds.(60/30/15/10/5/2/1/0.5/0.2/0.1 FPS)
(6)PRIORITY MODE : Assigns recording priority of a specific channel.
1
NONE : Each of 1,2,3,4 does not have priority.
2
1
:
Gives priority to #1 camera, and records in the sequence of 1-2-1-3-1-4-1-2....
3
1,2 :
Gives priority to #1 and #2 cameras, and records in the sequence of 1-2-3-1-2-4-1-
HDD CLEAR
HDD FULL
RECORD MODE
RECORD TYPE
RECORD SPEED
PRIORITY MODE
HDD CLEAR
HDD FULL
RECORD MODE
RECORD
TYPE
RECORD SPEED
PRIORITY
MODE
32
RECORD
SETUP
: NO
: OVERWRITE
: TIMER
: FIELD
: 60FPS
: NONE
SELECT
, PRESS
1
2
3
4
5
6
Advertisement
Table of Contents
