Siemens WD14U560TR Instruction Manual And Installation Instructions page 44

Table of Contents

Advertisement

Cleaning and maintenance
en
Press the # button. Pull out the
1.
mains plug.
Open the service flap.
2.
Take the drain hose out of the
3.
retainer.
Remove the sealing cap and pour
the water out into a suitable
container.
Replace the sealing cap and place
the drain hose back in the retainer.
Carefully unscrew the pump cover;
4.
residual water may leak out.
Clean the interior, pump cover
thread and pump housing. The
impeller in the drain pump must be
able to rotate.
44
Refit and screw on the pump cover.
5.
The handle must be in a vertical
position.
Close the service flap.
6.
To prevent unused detergent
Note:
from flowing straight into the drain
during the next wash: Pour 1 litre of
water into dispenser II and start the
Boşaltma (Drain) programme.

Advertisement

Table of Contents
loading

Table of Contents