Enter Setpoints For Filling/Dosing - Ravas ProLine 5200-Li User Manual

7
To set up conditions for the delay option
select 'Delay'.
9
Enter the number of seconds of the time of delay
and confirm with Enter.

5.13.1 Enter setpoints for filling/dosing

1
The setpoints for overload are entered. Select
'Fill/dosing' to enter these setpoints.
8
NOTE:
After you have defined the overload weight,
you can use the option of delay to define the
number of seconds the overload weight is
shown on the display before any output signal
becomes active.
For example, when you set the delay to 3
seconds, the overload signal becomes active
after the overload weight has been displayed
for 3 seconds.
10
Press 'Back'.
2
To automate the start and stop function of the
fill/dosing you can set different values.
E.g. the setpoints.
USER MANUAL – ProLine 5200-Li
33