URBAN OUTFITTERS Hugo Assembly Instructions

Hugo Shelf
Assembly Instructions

TOOLS REQUIRED BUT NOT INCLUDED:

Pencil, Level, Phillips head screw driver, Stud finder

WARNINGS:

Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface

CARE INSTRUCTIONS:

Avoid direct exposure to sunlight.
Do not place over heat or Air conditioning vents.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.

PARTS INCLUDED

A ) Shelf x1

STEP 1

Place the shelf (A) against the wall in the desired position and check for level. Mark the position
through the holes in the back of the shelf (A) and remove the shelf (A) from the wall.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights. Any unauthorized
Rev 1 04.22.22
B) Anchor x2
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
reproduction, adaptation, distribution or other infringement will be
C) Screw
[M4x35mm] x2
Page 1