Cleaning The Grease Filter; Removing The Catalytic Cleaning Plate - Gaggenau EB 208 Operating And Installation Instructions

Table of Contents

Advertisement

6.3 Cleaning the grease filter

Fig. 35
6.4 Removing the catalytic cleaning
plate (accessory)
Fig. 36
Fig. 37
You are advised to clean the grease filter after two
roasting operations or after baking if the oven gets
appropriately soiled.
Push the grease filter upwards and remove it.
Clean the grease filter in hot rinsing detergent or in
a dishwasher. If you clean the grease filter in a
dishwasher, place it vertically in the crockery
basket to ensure that no food remainders will stay
on it. After cleaning, hook the grease filter back
onto the rear panel.
If it is only slightly soiled, wash the oven while warm
using a hot rinsing detergent and leave it open to
dry.

Removing the catalytic cleaning plate:

– Remove the two knurled nuts at the front and rear
of both side panels (Fig. 36).
– Remove the catalytic side plates with the support
grids (Fig. 37). If the catalytic inside plates are
highly soiled, you can clean them in very hot
water with curd soap and a soft brush.
– Do not use any abrasive or aggressive detergents.
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eb 209

Table of Contents