Hoshizaki HW-320B Service Manual page 26

Appliance heats first the boiler and then the washing tank water. Washing operation will not start
until washing temperature reaches 'Factory Settings'.
7.3 Initial Preparation for Use:
At initial start of the appliance everyday, wait 25-30 min (depending on the dishwasher model) for the
supplied water to warm up. After the water temperature reaches 'Factory Settings',warning sound will
ring. Appliance is designed to function efficiently when proper temperatures are reached. If the
temperatures are decreased, wait for the appliance to reach proper temperature before starting a new
wash cycle.
7.4 Starting a Wash Cycle
Open the door, load the first basket and check that upper and lower arms turn freely. For selecting the
program, press the 'Start/Stop' switch. After, use the "Program Selection Key" to select a program (102
sec, 132 sec, 152 sec,172 sec or 192 sec) considering the dish type and dirt level, and press the
"Washing Start" button to run the program selected. Washing process time will countdown on LCD
screen. Once washing cycle is complete, rinsing cycle is started. İf the cover of the machine is opened
for the any reason, washing operation will stop. After closing cover the washing program will resume.
After finishing of the washing operation warning sound will ring. Open the door, pull out the basket
accommodating washed dishes and load a new basket. Close the door and start a new wash cycle.
24