4.d. Removal of the side panels.
1) Remove the top panel.
2) Remove the back panel.
3) Remove the kickplate.
4) Unscrew 4 screws in front of the machine and then unsvrew two screw
at the back of the machine and remove side panels.
By removing the side panels; You can reach ;
Door spring
Stopper flat spring
4d1. Removal and Replacement of Wash Pump Motor
1) Turn off the power supply. Lockout/Tagout to prevent the power from being
turned back on inadvertently.
2) Close the water supply line shut-off valve.
2) Pull out the drain pipe to drain water from the wash tank.
3) Remove the side panels
4).Remove the boiler.
17