Section 5 − Installation; Selecting A Location - Miller FieldPro Remote CE Owner's Manual

5-1. Selecting a Location

Movement
Location
18 in.
(460 mm)
OM-263 657 Page 14
SECTION 5 − INSTALLATION
!
Do not move or operate unit
where it could tip.
2
OR
1
3
1 Lifting Forks
Use lifting forks or hand cart to
move unit.
If using lifting forks, extend forks
beyond opposite side of unit.
2 Lifting Handles
Use handles to lift unit.
3 Hand Cart
Use cart or similar device to move
unit.
4 Line Disconnect Device
Locate unit near correct input
power supply.
2
!
Special installation may be
required where gasoline or
volatile liquids are present −
see NEC Article 511 or CEC
Section 20.
4
18 in.
(460 mm)
loc_2 3/96 - Ref. 151 556 / Ref. 255 179-B