Miele 09862980 Operating And Installation Instructions page 87

Problem
An oven mode has been
selected and the time of
day and the  symbol
still appear in the
display.
The oven does not heat
up.
An oven mode has been
selected but the oven is
not working.
 will appear in the
display with  flashing
under :
 appears
unexpectedly in this
display and the 
symbol flashes at the
same time. The buzzer
may also be sounding.
  appears in the
display.
If the door is opened
while using
"Microwave" , the
oven stops making a
noise.
A noise is heard after
the cooking process is
complete.
Frequently asked questions
Possible cause and solution
The system lock  is On.
 Turn off the system lock (see "System lock ").
Demo mode has been activated.  appears in the
display.
The oven can be operated but does not heat up.
 Deactivate Demo mode (see "Settings –  ").
There has been a power failure which has caused the
current cooking process to stop.
 Turn the mode selector to the • position and turn
the oven off. Start the cooking process again.
The power supply was interrupted for longer than 200
hours.
 Reset the time of day (see "Before using for the
first time").
The oven has been operating for an unusually long
period of time, this has activated the "Safety cut-out
feature".
 Turn the mode selector to •. The oven is now
ready to use again immediately.
A fault has occurred that you cannot resolve.
 Contact Miele Technical Service.
This is not a fault. If the door is opened while
"Microwave"  is being used, the door contact
switch will turn off the microwave and switch the
cooling fan to a lower speed.
The cooling fan has turned on.
It will turn off automatically after a short time.
87