Table of Contents
Advertisement
To enable or disable 20/40 MHz coexistence for the 2.4 GHz radio:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced > Wireless Settings.
The Advanced Wireless Settings page displays.
5. In the Wireless Network (2.4GHz b/g/n/ax section, select or clear the Enable 20/40
MHz Coexistence check box.
Selecting this check box enables 20/40 MHz coexistence and clearing this check
box disables 20/40 MHz coexistence.
By default, 20/40 MHz coexistence is enabled and the check box is selected.
6. Click the Apply button.
Your settings are saved. The 2.4 GHz radio restarts and WiFi clients might need to
reconnect.
Change the preamble mode for a radio
For most WiFi networks, the preamble mode works fine and we recommend that you
do not change the setting. (In general, this setting is intended for WiFi testing.)
CAUTION:
Do not change the preamble mode unless directed by NETGEAR
support or unless you are sure what the consequences are. An incorrect setting
might disable the WiFi function of a radio unexpectedly.
To change the preamble mode for a radio:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
Manage the WiFi Settings
Whole Home Quad-Band Mesh WiFi 7 System
71
User Manual
Advertisement
Table of Contents
