Table of Contents
Advertisement
Set up an IPv6 PPPoE Internet connection
To set up a PPPoE IPv6 Internet connection:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced > IPv6.
The IPv6 page displays.
5. From the Internet Connection Type menu, select PPPoE.
The page adjusts.
The router automatically detects the information in the following fields:
• Router's IPv6 Address on WAN: This field shows the IPv6 address that is acquired
for the router's WAN (or Internet) interface. The number after the slash (/) is the
length of the prefix, which is also indicated by the underline (_) under the IPv6
address. If no address is acquired, the field displays Not Available.
• Router's IPv6 Address on LAN: This field shows the IPv6 address that is acquired
for the router's LAN (or local network) interface. The number after the slash (/) is
the length of the prefix, which is also indicated by the underline (_) under the
IPv6 address. If no address is acquired, the field displays Not Available.
6. Configure the login settings:
a. In the Login field, enter the login information for the IPv6 PPPoE ISP connection.
This is usually the name that you use in your email address. For example, if your
main mail account is JerAB@ISP.com, you would type JerAB in this field. Some
ISPs (like Earthlink and Deutsche Telekom) require that you use your full email
address when you log in. If your ISP requires your full email address, type it in
this field.
b. In the Password field, enter the password for the IPv6 PPPoE ISP connection.
Specify Your Internet Settings
Whole Home Quad-Band Mesh WiFi 7 System
47
User Manual
Advertisement
Table of Contents
