Change Your Region - NETGEAR Orbi RBE971 User Manual

Change your region

To view or change your region:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced > Wireless Settings.
The Advanced Wireless Settings page displays.
5. In the Region menu, select your region.
In some locations, you cannot change this setting.
6. Click the Apply button.
Your settings are saved.
Enable or disable 20/40 MHz coexistence
for the 2.4 GHz radio
20/40 coexistence allows a 20 MHz and 40 MHz channel width to be supported
simultaneously. By default, 20/40 MHz coexistence is enabled on the 2.4 GHz radio to
prevent interference with other WiFi networks in your environment at the expense of
the WiFi speed. If no other WiFi networks are present in your environment, you can
disable 20/40 MHz coexistence to increase the WiFi speed on the 2.4 GHz radio to the
maximum supported speed for the WiFi mode.
20/40 MHz coexistence does not apply to the 5 GHz and 6 GHz radios.
Manage the WiFi Settings
Whole Home Quad-Band Mesh WiFi 7 System
70 User Manual