Cts/Rts Threshold And Preamble Mode For A Radio - NETGEAR SXK50 User Manual

Orbi Pro WiFi 6 AX5400 Router Model SXR50 and Orbi Pro WiFi 6 AX5400 Satellite Model SXS50
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings page displays.
5. For a radio, select or clear the Enable WMM (Wi-Fi multimedia) settings check
box.
When this check box is selected (which it is by default), WMM is enabled.
6. Click the Apply button.
Your settings are saved.
CTS/RTS threshold and preamble mode for
a radio
For most WiFi networks, the clear to send/request to send (CTS/RTS) threshold and
preamble mode work fine and we recommend that you do not change the settings. (In
general, these settings are intended for WiFi testing.)
CAUTION: Do not change these settings unless directed by NETGEAR support or
unless you are sure what the consequences are. Incorrect settings might disable the
WiFi function of a radio unexpectedly.
To change the CTS/RTS threshold and preamble mode for a radio:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi Pro network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see What to do if you get a browser security warning on
page 30.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you set the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings page displays.
Manage the Advanced WiFi
Settings
191 User Manual