Table of Contents
Advertisement
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Attached Devices.
The Attached Devices page displays the following information in the Connected
Devices section:
• Status: Displays only if you enable network access control (see Network access
control list on page 54). The field displays if a device is allowed or blocked.
• Device Name: This section displays the device model, name, type, and IP address.
• IP Address. This section displays the device IP address. The device's IP address
can change because the router assigns an IP address to each device when it joins
the network.
• MAC Address: This section displays the device MAC address. The unique MAC
address for each device does not change.
• Connection Type: This section displays how the device is connected to the Orbi
network through a wired Ethernet connection or a 2.4 GHz, 5 GHz, or 6 GHz WiFi
connection.
• Connected Orbi: This section displays the Orbi router or satellite that the device
is connected to. The Orbi router's or satellite's MAC address also displays.
If you configured VPN (see Use OpenVPN to Access Your Network on page 140) and
any VPN client devices are connected to the router, the following information is
displayed in a separate table:
• Device Name: If the device name is known, it is shown here.
• Remote IP Address: The device IP address at the remote location
• Local IP Address: The device IP address at the router network.
• Connection Time: The time that the VPN connection is active.
5. To update this page, click the Refresh button.
Edit device information on the Attached Devices page
You can change the connected device model and name that display on the Attached
Devices page.
Mantain and Monitor Your
Network
Whole Home Quad-Band Mesh WiFi 7 System
114
User Manual
Advertisement
Table of Contents
