Change Your Region; Use The Router As A Wifi Access Point - NETGEAR Orbi RBR350 User Manual

6. To change the network name, type a new name in the Guest Wireless Network
Name (SSID) field.
The name can be up to 32 characters long and it is case-sensitive. If you change the
name, make sure to write down the new name and keep it in a safe place.
7. To enable security and encryption for the guest WiFi network, select a security option.
8. In the Password (Network Key) field, enter the network key (password) that you
want to use.
9. Click the Apply button.
Your settings are saved. The router sends the new settings to the satellite.

Change your region

To change your region:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings page displays.
5. In the Region list, select your region.
In some locations, you cannot change this setting.
6. Click the Apply button.
Your settings are saved.

Use the router as a WiFi access point

You can set up the router to run as an access point (AP) on the same local network as
another router or gateway.
Specify Network Settings
Orbi WiFi 6 Dual-band Mesh System
69 User Manual