Heating/Cooling Modes; Comfort/Eco Modes; Eco Mode Setback Temperature - Uponor T-27 Installation And Operation Manual

Settings Name Description
menu
number
12 MAH Max. value of setting range of the setpoint
temperature, Page 14
13 HYS Hysteresis value, Page 14
― rES Factory reset, Page 14
Enter the settings menu
The settings menu is accessible in both Comfort and ECO modes.
Follow below instructions to enter the settings menu:
1. Press the key O (OK) for 3 seconds
2. Scroll up and down in the menu with the keys ― and +
3. Select the desired menu by pressing the key O (OK)
4. Change the value with the keys ― and +
5. Press the key O (OK) to confirm the settings
6. Press the key O (OK) for 3 seconds to return to the current
mode

4.6 Heating/cooling modes

Values: Hot/CLd
Value Description
Hot Heating mode (default)
CLd Cooling mode

4.7 Comfort/ECO modes

Values: Comfort/ECO modes
Value
CmF
Eco
Comfort mode
Setpoint setting
21 °C
If no limitation is defined, please see the settings menu
ECO mode
Setpoint setting
17 °C
If no limitation is defined, please see the settings menu
4.8 ECO mode setback
CD0000442
temperature
Description
Default value
Step
Values
Uponor Base thermostat display T-27 230V
Description
Comfort mode (default)
ECO mode
Step
0,5 °C
Step
0,5 °C
Value
4 °C
0,5 °C
0 °C to 11 °C
| Installation and operation manual
CD0000437
Temperature range
5,0 °C to 35 °C
Temperature range
5,0 °C to 31 °C
CD0000440
| 11