Removing & Installing Body Components
Battery
Clip
#
Removal
Make sure the ignition switch is in the
(Off) position.
270
Positive terminal
Terminal nuts
Negative
terminal
Battery
Bolts
Battery box band
Remove the tool box.
1.
Disconnect the negative - terminal from
2.
the battery.
Disconnect the positive + terminal from
3.
the battery.
Remove the clip.
4.
2
Open the battery box band.
5.
Remove the battery from the battery case
6.
taking care not to drop the terminal nuts.
#
Installation
Install the parts in the reverse order of
removal. Always connect the positive +
terminal first.
Make sure that bolts and nuts are tight.
Make sure the clock information is correct
after the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
P. 277
2
P. 272
P. 93
2
P. 259
2
P. 334
2