Table of Contents
Advertisement
en Cleaning and servicing
briefly increased. Consumption val-
ues, e.g. water and electricity, may
also increase.
If the interior is no longer self-cleaned
adequately and deposits occur, see
this information:
→ "Cleaning the tub", Page 41.
Cleaning products
Only use suitable cleaning products
to clean your appliance.
→ "Safe use", Page 11
Tips on appliance care
Follow the tips on appliance care to
make sure your appliance functions
properly at all times.
Action
Wipe the door seals,
the front of the dish-
washer and the con-
trol panel regularly us-
ing a damp cloth and
washing-up liquid.
If the appliance is not
going to be used for a
while, leave the door
slightly ajar.
Easy Clean
Deposits can cause your dishwasher
to malfunction, e.g. due to grease or
limescale. To avoid such faults and
reduce odours, we recommend
cleaning your appliance at regular in-
tervals.
Easy Clean used in combination with
commercially available machine care
products is a suitable programme for
cleaning your dishwasher.
Run Easy Clean without tableware if
the indicator for Easy Clean lights up
on the control panel or if advised to
1
Depending on the appliance specifications
42
Benefit
This ensures the parts
of the appliance will
remain clean and hy-
gienic.
This will prevent un-
pleasant odours.
1
do so by the display. The indicator
will go out after you have run Easy
Clean. If your appliance does not
have a reminder function, follow the
directions for use on the machine
care products.
Performing Easy Clean
Run the Easy Clean programme if the
indicator for Easy Clean lights up on
the control panel or if advised to do
so by the display.
Notes
¡ Run the Easy Clean programme
without any tableware in the dish-
washer.
¡ Only use suitable machine care
products specially designed for
dishwashers and not dishwasher
detergent. Observe the manufac-
turer's instructions.
¡ Make sure that there are no alu-
minium parts in the interior of the
appliance.
¡ If you have not run Easy Clean
after 3 washing cycles, the indic-
ator for Easy Clean will go out
automatically.
¡ Follow the safety instructions and
the directions for use on the pack-
agings of the machine care
products.
Remove any coarse soiling in the
1.
interior with a damp cloth.
Clean filters.
2.
Add the machine care product to
3.
the appliance.
Press
.
4.
Press
.
5.
a Easy Clean is run.
a As soon as machine care has fin-
ished, the indicator for Easy Clean
goes out.
Advertisement
Table of Contents
