Advertisement
•［Transmission protocol］
Select and set the protocol with the destination server from FTP/SFTP.
• SFTP：SFTP is used as the protocol for transmitting with the server.
• FTP：FTP is used as the protocol for transmitting with the server.
• Default：SFTP
IMPORTANT
• When FTP is selected in the protocol settings, FTP server authentication information (user names
and passwords) may be leaked on the network when sending images to the FTP server.
Alarm setting
[Alarm image transmission]
Select "On" or "Off" to determine whether or not to transmit images when an alarm is detected.
• On: Transmits an image to the server when an alarm has occurred.
• Off: Does not transmit an image to the server when an alarm has occurred.
• Default: Off
[Directory name]
Enter the directory name where the alarm images are to be saved.
For example, enter "/ALARM" to designate the directory "ALARM" under the root directory of the server.
• Available number of characters: 1 - 256 characters
• Unavailable characters: " & ;
[File name]
Enter the file name used for the alarm image to be transmitted to the server. The file name will be as
follows.
• File name: ["Entered file name" + "Time and date (year/ month/ day/ hour/ minute/ second)"] + "Serial
number"
• Available number of characters: 1 - 32 characters
• Unavailable characters: " & * / : ; < > ? ¥ |
When "On" is selected for [Alarm image FTP transmission], you can select the alarm type from the
following.
Terminal 1-3 ＜ Terminal input/output supported models only ＞
• Terminal1: Transmit the image to the server when an alarm occurs in Terminal 1.
• Terminal2: Transmit the image to the server when an alarm occurs in Terminal 2.
• Terminal3: Transmit the image to the server when an alarm occurs in Terminal 3.
• VMD: Transmit the image to the server when motion is detected.
• SCD: Transmit the image to the server when SCD (scene change detection) occurs.
• Audio detection: Transmit the image to the server when audio detection occurs.
• Command alarm: Transmit the image to the server when a command alarm is entered.
The following functions are unique for PTZ camera ＜
• Auto track: Transmit the image to the server when an auto track occurs.
only ＞
PTZ S
58
Advertisement
