Operating The Edger - Ryobi R18LTR10 Manual

OPERATING THE EDGER

1. Remove the battery pack.
2. Push the edging button. Rotate the upper
drive shaft counterclockwise to turn to the
edger position.
3. Insert the battery pack until the battery
latch button clicks into place. Hold the
lock-out trigger, and squeeze the on/off
trigger to turn on the product.
4. Use the edger along
driveways, flower beds, curbs, and
similar areas.
10
Operation
1
2
3
sidewalks,
4
1
1
1
2
180°
2
2
3