Phone Lock - Sony Ericsson Z208 User Manual

Phone lock

The phone lock protects the phone against
unauthorized use if it is stolen and the SIM card is
exchanged. It is not on when you buy the phone.
You can change the phone lock code (0000) to any
four- to eight-digit personal code. The phone lock
can be set to on, automatic or off.
Note: The phone lock code must be entered to use
Master reset. See "Master reset" on page 27 for
more information.
Phone lock on
If the phone lock is on, the message Phone locked
appears each time you turn on the phone.
You have to enter your code followed by
your phone.
Automatic
If the phone lock is set to automatic, you do not need
to enter your phone lock code until a different SIM
card is inserted in the phone.
This is the Internet version of the user's guide. © Print only for private use.
To set the phone lock
1. Scroll to Settings,
Protection,
2. Select an alternative and press
3. Enter the phone lock code and press
Editing the phone lock code
It is important that you remember your new code.
If you should forget it, you have to hand in your
phone to your local Sony Ericsson retailer.
To edit your phone lock code
Scroll to Settings,
Change code,
Memory status
to use
YES
Check for example, how many positions are left in
your phonebook or how much memory is used.
To check the memory of the phonebook
Scroll to Phonebook,
To check the memory for pictures and sounds
Scroll to Fun & Games,
menus,
, Locks,
YES YES
.
YES
YES
, Locks,
YES YES
.
YES
, Memory status,
YES
, select one of the
YES
, , select Memory status,
YES
, Phone lock, ,
YES
.
.
YES
, Phone lock, ,
YES
.
YES
.
YES
Security 61