Sony Ericsson Z250 Installation Instruction

Hide thumbs Also See for Z250:

Table of Contents

Download this manual See also: User Manual

Installation Instruction, Mechanical

Applicable for Z250 and Z320

Contents

1/000 21-1/FEA 209 544/121 A

Company Internal

Sony Ericsson Mobile Communications AB

General ............................................................................................................... 2

Hardware ............................................................................................................ 2

2.1

Test Setup ............................................................................................. 2

2.2

Computer............................................................................................... 3

2.3

2.4

2.5

Label Printer (Optional) .......................................................................... 3

2.6

Software ............................................................................................................. 4

3.1

Emma Iii................................................................................................ 4

3.2

Labelmake Ii Software (Optional) ........................................................... 4

Revision History ................................................................................................ 5

Installation Instruction, Mechanical

Table of Contents

Need help?

Do you have a question about the Z250 and is the answer not in the manual?

Page 1 Hardware ......................2 Test Setup ..................... 2 Computer....................3 Sony Ericsson Programming Interface – SEPI........3 Sony Ericsson Programming Interface (SEPI) A1 Cable ...... 3 Label Printer (optional) ................3 Service Card Reader/Service Card (optional) ........3 Software ......................4 EMMA III....................
Page 2 (optional). A service card is required for Label Make II. 2 Hardware All hardware must be approved by Sony Ericsson and is documented in the Equipment List. Test Setup The Test setup is to perform SW loading and manual test according to Test Instruction.
Page 3 The USB programming interface (SEPI) should be connected to an USB-port on the computer. The SEPI is required when upgrading the phone. Sony Ericsson Programming Interface (SEPI) A1 Cable The cable is the interface between the USB programming interface (SEPI) and the phone.
Page 4 Press “START LabelMake II “button and you will be directed to the LABELMAKE II client page. Product labels are downloaded on-line from a remote server database. 1/000 21-1/FEA 209 544/121 A 4(5) © Company Internal Sony Ericsson Mobile Communications AB...
Page 5: Revision History
Installation Instruction, Mechanical 4 Revision History Rev. Date Changes / Comments 2007-10-09 release 1/000 21-1/FEA 209 544/121 A 5(5) © Company Internal Sony Ericsson Mobile Communications AB...