Setting Up Wap; Wap Browser - Sony Ericsson Z208 User Manual

Setting up WAP

WAP browser

Requirements
In order to use the Internet or browse via
WAP services, the following are required:
• A phone subscription that supports data
transmission.
• Settings entered in your phone. Settings may
already be entered when you buy your phone or
you can receive settings in a text message from
your network operator or service provider.
• You may also have to register as a WAP user with
your service provider or network operator.
Receiving settings in a text message
Your GSM network operator or Internet service
provider may be able to send the required data
account and WAP settings direct to your phone in a
text message (SMS).
This is the Internet version of the user's guide. © Print only for private use.
To install settings
When the message arrives, New settings received
Install? appears:
• Press to install the new settings. If settings
YES
already exist in your phone you can either keep or
replace them. See "Advanced setting
information" on page 44.
• Press to cancel installation.
NO
After installation, see "Using WAP" on page 54.
Set up with the wizard
If your phone is not set up for WAP, you can ask
your network operator or service provider to provide
you with WAP settings information. Then you can
simply use the wizard in your phone to help guide
you through the relevant settings.
To use the wizard for setting up WAP
1. Scroll to WAP services,
Sony Ericsson), . The wizard now starts if no
YES
WAP settings exist.
2. Enter and save settings when asked,
press to confirm.
YES
, homepage (for example
YES
Setting up WAP 43