Displayfirmware Version - Linear 2GIG Go!Control GC2 User Manual

DISPLAY FIRMWARE
VERSION
To troubleshoot your system, you can
check the firmware version that has been
installed.
To display the firmware version, do the
following:
From the Home Screen, press Security.
1
From the Security Screen, press Menu.
2
From the Menu Screen, press Toolbox.
3
From Toolbox Screen (1 of 3), press the
4
→ arrow.
From Toolbox Screen (2 of 3), press
5
Version.
When finished, press Back.
6
©2013 2GIG Technologies Inc. All Rights Reserved.
System Toolbox
37