Emergency Functions; Hour Emergencybuttons - Linear 2GIG Go!Control GC2 User Manual

EMERGENCY FUNCTIONS

24-HOUR EMERGENCY BUTTONS
Three 24‐hour emergency functions are available on the Control Panel:
• Panic
• Fire
• Emergency
You can activate emergency functions using the Control Panel as well as wireless sensors,
wireless keypads or from portable pendant devices such as the panic button remote.
The button displays the emergency screen. Just pressing the
an alarm. During the installation, your installer programmed the emergency buttons that are
displayed on the Emergency Screen. If, however, no emergency functions are available, an
information screen displays. To see which emergency functions are available on your system,
press the button.
In the event of an emergency, press and hold the emergency button for at least 2 seconds to
activate the alarm.
A If emergency functions are available, the Emergency button is a solid white lighted button.
B To display the Emergency Screen, press the Emergency button.
C The Emergency Screen.
D The Emergency Screen displays the emergency options that are available on your system.
Panic
The panic (or police) button sends an immediate panic report to the Central Station. During
installation, the installer either set the system to sound the siren when the button is pressed,
or to not sound the siren, but to trigger a silent alarm.
Fire
The Fire button send an immediate fire report to the Central Station. The Control Panel
sounds the fire horn when the button is pressed.
Emergency
The emergency button sends an immediate report to the Central Station. The Control Panel
sounds the siren when the emergency button is pressed.
©2013 2GIG Technologies Inc. All Rights Reserved.
button does not trigger
21