Changing A User Code; Deletinga User Code; Duress User Code Setup - Linear 2GIG Go!Control GC2 User Manual

On the User Access Schedules Screen,
3
select the schedule to delete.
On the Schedule Type Screen press
4
Delete.
A confirmation screen appears to verify
5
that you really want to delete the User
Access Schedule. If Ok, press Delete
Schedule or press Cancel to return to the
User Access Schedule Screen.
A second screen confirms that the
6
schedule was deleted. Press Ok.

Changing a User Code

From the User Management Screen,
1
press the User button to change the User
Code.
Ensure that the currently selected User
2
Code (or Pin number) appears, and press
Change Pin.
Enter a new four‐digit User Code (or Pin
3
number) and press Ok.
To confirm the User Code, enter the Pin
4
again. Press Ok.
A confirmation screen appears, showing
5
that the User Code was changed. Press
Ok.
Deleting a User Code
To delete a User Code from the User
1
Management Screen, press the User
button.
Press Delete.
2
A confirmation screen appears to verify
3
that you really want to delete the User
Code. If Ok, press Delete User or press
Cancel to return to the User Codes
Access Option Screen.
A confirmation screen appears displaying
4
the User Code that was deleted. Press
Ok.
You can change the Master User
TIP:
Code, but you cannot delete it.

Duress User Code Setup

The Duress User Code (User Code #8)
initiates a silent alarm for help by secretly
sending a Duress report to the Central
Station.
Use the Duress Code when someone is
forcing you to operate your security system
against your will. When you use the Duress
Code, a silent report is immediately sent to
the Central Station and they will dispatch
help.
©2013 2GIG Technologies Inc. All Rights Reserved.
System Toolbox
29