Page 1
3 PANEL SINGLE POINT INFLATABLE WINDBREAK (MP9526) USER GUIDE Please read this user guide before attempting to set up your windbreak. Follow the user guide carefully and keep for future reference. A copy of the user guide is also available on our website www.maypoleltd.com...
Page 2
3 PANEL SINGLE POINT INFLATABLE WINDBREAK (MP9526) USER GUIDE WARNING – GENERAL SAFETY • Not to be used in extreme weather conditions. CARE OF YOUR WINDBREAK • Allow material to dry completely before storing in the storage bag provided. • Remove dirt with a soft sponge and warm water. DO NOT use detergent.
Page 3
3 PANEL SINGLE POINT INFLATABLE WINDBREAK (MP9526) USER GUIDE PITCHING INSTRUCTIONS Recommended 2 person Pitch. Remove the windbreak from the carry bag and place flat on the ground. There are 2 valves on the windbreak. Locate the first valve and unscrew the top cap.
Page 4
3 PANEL SINGLE POINT INFLATABLE WINDBREAK (MP9526) USER GUIDE Repeat this process for each section of the windbreak. It is recommended each peg is driven fully into the ground at an angle of 45 Degrees away from the pegging point. Tension each guy rope using the guy adjusters (FIG 5).
Page 5
To deflate the air beams unscrew the bottom cap on both valves and the air will be released. WARNING – Be aware of sudden loud noise caused by air escaping when deflating. Technical Manager Maypole Ltd November 2020 Email: sales@maypoleltd.co.uk Web: www.maypoleltd.com...
Need help?
Do you have a question about the MP9526 and is the answer not in the manual?
Questions and answers