MayPole Erde MP6812 Assembly And Usage Instructions

Download this manual

NUTS AND BOLTS CONTENT IN BOX B

90° BRACKET

WEAR GLOVES

DURING ASSEMBLY

Manufactured on behalf of

LIMITED

Maypole Ltd, Birmingham UK

www.maypole.ltd.uk

sales@maypoleltd.co.uk

NOTE: TIGHTEN FIXINGS TO TORQUES

PRESCRIBED IN THE LIST OF TOOLS

MP6812

(M6)

(M8)

(M10)

Need help?

Do you have a question about the Erde MP6812 and is the answer not in the manual?

Page 1 MP6812 NUTS AND BOLTS CONTENT IN BOX B (M6) (M8) 90° BRACKET (M10) Manufactured on behalf of WEAR GLOVES DURING ASSEMBLY LIMITED Maypole Ltd, Birmingham UK www.maypole.ltd.uk sales@maypoleltd.co.uk NOTE: TIGHTEN FIXINGS TO TORQUES PRESCRIBED IN THE LIST OF TOOLS...
Page 2 DO NOT FULLY TIGHTEN FIXINGS AT THIS STAGE REMOVE PRE-FITTED BOLT TO DRAW BAR CLIP CABLES TO THE BEAM M 12x70 FULLY TIGHTEN ALL FIXINGS IN SECTIONS A-C INSERT BOLT TO DRAW BAR...
Page 3 FULLY TIGHTEN THE WHEEL NUTS CHECK THAT THE BASE PANEL IS SECURELY CLAMPED DOWN ON TO THE DRAW BAR FULLY TIGHTEN FIXINGS IMMEDIATELY...
Page 4 DO NOT FULLY TIGHTEN FIXINGS IN SECTIONS G-J UNTIL INSTRUCTED TO DO SO...
Page 5 90º BRACKETS FIT THE 90º BRACKETS INSIDE THE MUDGUARD...
Page 6 CLOSE AND SECURE TAILGATE THEN FULLY TIGHTEN ALL FIXINGS IN SECTIONS G-J Road trailers must be inspected prior to use to ensure they are of a road worthy • Wheels After assembly and again condition; it is a legal requirement that all trailers are maintained and comply •...