Table of Contents
Advertisement
Daylight – adjusts the colour balance for outdoor use
Cloudy – adjusts the colour balance for a cloudy sky
* No icon appears when this function is activated.
To set the white balance in photo mode
1
Activate the camera and tap
2
Select Photo > White balance.
3
Select an option.
Image stabiliser
The image stabiliser compensates for small movements of the hand to ensure steady
photos. When you turn on this function,
To activate the image stabiliser
1
Activate the camera.
2
Tap
.
3
Select Photo > Image stabiliser > On.
Effects
Before taking photos or recording video clips, you can set and view different effects.
Off* – for normal photos
Negative – invert red, green and blue separately, and to varying degrees
Solarise – add an artificial effect to your photo
Sepia – give the photo a brown tint so it appears older
Black & white – take black and white photos
* No icon appears when this function is activated.
To set effects in photo mode
1
Activate the camera and tap
2
Select Photo > Effects.
Shutter sound
Before taking a photo, you can select or mute a shutter sound.
Shutter sound 1-4
Off
To set the shutter sound
1
Activate the camera and tap
2
Select Photo > Shutter sound.
Location information
When
appears on the screen, your geographical position is saved with the photos you
take. This is called geotagging. Geotags show the approximate location of where a photo
was taken.
To add location information to a photo
1
Activate the camera and tap
2
Select Setup > Geotag > On.
This is an Internet version of this publication. © Print only for private use.
.
appears in the viewfinder.
.
select one of four shutter sounds
take photos without a shutter sound
.
.
50
Advertisement
Table of Contents
