Table of Contents
Advertisement
A
CAUTION:
cause noise problem.
CAUTION:
must be removed and the water inside the product must be drained when the product is not
in use.
CAUTION:
In order to clean the dirty filter and discharge the water:
1 Unplug the product to cut off the supply power.
A
CAUTION:
the burning risk, clean the filter after the water inside the product is cooled down.
2. Open the filter cover.
3 Follow the below procedures in order to drain water.
Product does not have an emergency water drain hose, in order to drain the water:
4 Clean any residues inside the filter as well as fibers, if any, around the pump impeller
region.
5. Replace the filter.
6. If the filter cap is composed of two pieces, close the filter cap by pressing on the tab. If
it is one piece, seat the tabs in the lower part into their places first, and then press the
upper part to close.
39 / EN
Foreign substances left in the pump filter may damage your product or may
In regions where freezing is possible, the faucet must be closed, system hose
After each use, turn off the water tap to which the mains hose is connected.
Temperature of the water inside the product may rise up to 90 ºC. To avoid
Filter cap is composed of two pieces,
press the tab on the filter cap
downwards and pull the piece out
towards yourself.
a. In order to collect the water to flow out
of the filter, place a large vessel in front
of the filter.
b. Turn and loosen the pump filter until
water starts to flow (counterclockwise).
Fill the flowing water into the container
you have placed in front of the filter.
Always keep a piece of cloth handy to
absorb any spilled water.
c
When the water inside the product is
finished, take out the filter completely
by turning it.
Washing Machine / User's Manual
Advertisement
Table of Contents
