Mitsubishi Daiya SRK25RE1 User Manual page 34

Maintenance
During the operational season
Before maintenance
Cleaning the air filter
Turn off the power switch.
Remove the air filter
Pull up to this side the suction grill.
①
Lightly hold the knobs at both sides
②
and a little to remove the grill to this
side.
Cleaning
Don' t spill water.
If the filter is very dirty,clean it with warm water
(approx. 30℃),and dry it thoroughly.
Don' t clean the filters with boiling
water.
Don't dry them over an open flame.
Pull them out gently.
Wipe the unit with a soft dry
cloth.
Never contact with the alumin-
Reinstall the air filter
um fin on the air heat exchan-
Holding firmly the filter at both sides
ger.
as shown at right and inset securely.
When unloading the inspirati-
Operating without putting back the
on grid and filter screen, stand
air filters will make the unit dusty,
on the stepladder or other sta-
and may cause damage.
ble objects firmly.
Cleaning the unit
Wipe the unit with a soft, dry cloth, or use a vacuum
Don't use the following articles:
cleaner.
Hot water ( 40 ℃ or more)
If the unit is very dirty, wipe it with a cloth soaked in
Petrol, paint thinner, benzine
warm water.
or polishing agents, etc.
They may deform or scratch
Cleaning the air inlet panel
the unit.
Unloading, loading and installing the
inlet panel.
Panel can be washed by water. Wipe the
water on the panel and dry it after washing.
Standard interval is once
every two week.
At the beginning of the season
At the end of the season
Make certain that there are no obstac-
Set the temperature setting for app-
roximately a half day at 30℃ and les blocking the air flow around the air
intake and outlet openings of the ind-
perform the cooling operation.
oor and outdoor units.
Dry the inside of the unit.
Check the installation base for corros-
Stop the unit and turn off the power
ion or tunst.
switch.
The unit uses appr.2W even when the po-
Ensure that nothing has snapped and
wer switch has been turned off during the that the earthed flex is not disconnec-
off season for saving energy.
ted.
Clean and reinstall the air filters.
Ensure that the air filters are clean.
Clean both the indoor and outdoor
units. Turn on the power switch.
Remove batteries from the remote
Insert batteries in the remote control.
control.
RYD012A352