Advertisement
Quick Links
BEFORE YOU BEGIN
BEFORE YOU BEGIN
·
Please read these instructions carefully to
familiarize yourself with the required tools, materials,
and installation sequences. Follow the sections that
pertain to your particular installation. This will help
you avoid costly mistakes. In addition to proper
installation, read all operating and safety instructions.
·
All information is based on the latest product
information available at the time of publication.
Kohler China Ltd. reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
·
These instructions contain important care, cleaning,
and warranty information-please leave these
instructions for the consumer.
WARNING: Risk of personal injury.
Cast iron bathes are extremely heavy. Wear
appropriate safety equipment when installing these
products.
NOTICE:
Observe all local plumbing codes.
PRODUCT REQUIREMENTS
A. Summary Of Key Requirements
·
Observe all local plumbing codes.
·
Install the unit to a level subfloor.
·
Provide properly-dimensioned framing.
·
Baths are designed for a variety of installations,
depending upon the model chosen.
B. Product Inspection
Uncrate and inspect bath for damage. Leave all
materials in the crate during construction to prevent
damage.
1006291-T01-C
K-940T/K-940T-GR/K-941T/K-941T-GR
·
·
·
"
A.
·
·
·
·
B.
368
201419
ã
-1-
Copyright Kohler China Ltd., 2006
C
ADAGIO
K-731T/K-731T-NR/K-731T-GR
SOISSONS
K-943T/K-943T-GR
INSTALLATION INSTRUCTIONS
ENAMELED CAST IRON BATH
, 2006
Advertisement
Related Manuals for Kohler ADAGIO K-731T
Summary of Contents for Kohler ADAGIO K-731T
- Page 1 · · All information is based on the latest product information available at the time of publication. Kohler China Ltd. reserves the right to make changes in product characteristics, packaging, or availability at any time without notice. · ·...
- Page 2 ROUGHING-IN A. Roughing-in Notes Fixture dimensions are nominal and conform to tolerances in ANSI Standard A112.19.1M. A112.19.1M B. Determine Rough-in Measure the height, width, and depth of the bath. Verify these dimensions with those on this page. Allow clearance at the drain hole location in the flooring, if necessary.
-
Page 3: Installation Requirements
C. Accessory Information ADAGIO Grip Rail..8598T-CP(For 731T/731T-GR) ....8598T-CP( 731T/731T-GR) SOISSONS Grip Rail .......8599T(For 940T-GR/ 941T-GR/943T-GR ....8599T( 940T-GR /941T-GR/943T-GR D. CUT-OUT Dimensions K-731T ADAGIO 1662 762mm K-731T 1662 762mm K-940T/K-940T-GR SOISSONS 1662 662mm K-940T/K-940T-GR 1662 662mm K-941T/K-941T-GR SOISSONS 1462 662mm K-941T/K-941T-GR 1462 662mm K-943T//K-943T-GR SOISSONS 1562 662mm... - Page 4 BEFORE INSTALLING UNIT BEFORE INSTALLING UNIT A. The following installation practices must be followed to avoid any potential damage to the enamel finish. WARNING: Failure to follow the manufacturers recommended installation method may result in damage to the enamel surface. Do not use sharp objects or metal tools when handling the bath, especially around the rim area.
- Page 5 Brick Metal Shim A2. Through the Floor Drain Bath Installation Slide the new bath into position to verify the drain location and the stud fit. Cut a minimum 152 x 305 mm hole in the floor for the drain connection. 152 305mm Use 25~30 Kg dry cement and sand mix.
- Page 6 B. Install Plumbing CAUTION: Risk of damage to bath bottom and subfloor. Ensure a watertight seal on the bath drain connections. For through the floor drain installation, when the bath is securely positioned, connect the drain to the trap. See Fig. A. 2) Install the faucet valving and spout tee.
- Page 7 3) Peninsular Installation The suggested framing construction is illustrated. INSTALL THE GRIP RAIL INSTALL THE GRIP RAIL For ADAGIO Bath 731T, 731T-GR Place the gasket (1) onto the grip rail(2). Make sure the gasket is matching the contour of the grip rail. Insert both screws(3) into the holes through the grip rail and the gasket.
-
Page 8: Clean-Up After Installation
COMPLETE FINISH WALL COMPLETE FINISH WALL CAUTION: Risk of product damage. Do not support the weight of the bath by the rim. Install the ceramic or marble tiles. Seal the joints between the bath rim and the finished tiled wall using silicone sealant. - Page 9 Kohler bathtubs. NOTICE: All housekeeping and maintenance employees must be trained in the proper cleaning of Kohler bathtubs. Post a copy of this notice in a readily-visible location. DO NOT use steel wool, wire brushes, metal scrapers or abrasive sponge pads to clean a Kohler bath tub.
-
Page 10: Limited One-Year Warranty
This product is warranted for one year from date of purchase. Kohler China will be responsible for any problems caused by manufacturing defects provided with the invoice. Kohler China will, at its election, repair, replace or make appropriate adjustment where Kohler China inspection discloses any such defects occurring in normal usage within one year after purchase.