Yamaha YRS-2500 Owner's Manual page 89

Connecting a TV
Connect a TV to the unit so that video input to the unit can be output to the TV. You can also enjoy playback of TV audio on the unit.
• Use a 19-pin HDMI cable with the HDMI logo printed on it. A cable with a maximum length of 5 m is recommended to prevent degradation of signal quality.
• For playback of 3D and 4K video content, use a high-speed HDMI cable.
TVs that support Audio Return Channel (ARC)
Connect the TV to the unit with an HDMI cable (not supplied).
The unit (rear)
R L AUX2 TV OPTICAL
OUT (ARC) IN1
AUX1
HDMI OUT (ARC) jack
When connecting a TV that supports Audio Return Channel (ARC), activate the HDMI
control function (p. 51).
Audio Return Channel (ARC)
ARC enables input and output of audio signals via a single HDMI cable. If the TV supports ARC, audio
signals from the TV can be input to this unit via the same HDMI cable used to output video signals from
this unit to the TV.
• Use an ARC-compatible HDMI cable.
18
Connections
En
HDMI
HDMI HDMI
IN2 IN3
OUT (ARC)
TVs that do not support Audio Return Channel (ARC)
Connect the TV to the unit with an HDMI cable (not supplied) and an optical cable.
The unit (rear)
HDMI input
HDMI
(ARC)
R L AUX2
AUX1
TV input jack
TV
1. Remove the cap
• TVs not equipped with an optical jack
Audio content from the TV can be input via the AUX2 coaxial digital jack or AUX1 analog input jacks. Set
"TV INPUT" in the setup menu to "COAXIAL [AUX2]" or "ANALOG [AUX1]" accordingly (p. 52).
HDMI
HDMI
TV OPTICAL
OUT (ARC) IN1 IN2 IN3
OUT (ARC)
HDMI OUT (ARC) jack
O O
TV
Audio output
(digital optical)
2. Check the direction of
the plug
HDMI input
HDMI
HDMI
OPTICAL
TV