Adjusting Volume For Each Channel; 2-Channel Playback (Stereo Playback Mode) - Yamaha YRS-2500 Owner's Manual

STEREO
CH LEVEL
SUB (+/-)
/
36
Enjoying sound based on your preference
En

Adjusting volume for each channel

Adjust the volume of playback for each channel (audio in each
direction) so that sounds are evenly distributed in their respective
directions.
• Refer to "CHANNEL LEVEL" (p. 49) when adjusting the volume of each channel
with the test sound.
1
Press the CH LEVEL key to select adjustable
channel from the followings.
FL: Front left
FR: Front right
C: Center
SL: Surround left
SR: Surround right
SUB: Subwoofer
• In stereo playback mode, only SUB (subwoofer) volume can be adjusted
(p. 36).
• Volume for the following channels can be adjusted when MY SUR. (My
Surround) is selected (p. 35).
C: Center
SL/SR: Surround (left/right)
SUB: Subwoofer
2
Press the / key to adjust the volume.
Adjustable range: -20 to +20
Example of volume balance
• If you have problems hearing words: Select C (center) to increase the level.
When the sound is not like surround sound: Select SL (surround left) and SR
(surround right) to increase the level.
• The volume of the subwoofer also can be adjusted by using the SUB (+/-) key.

2-channel playback (stereo playback mode)

The front channels are the primary channel sources for output of
stereo sound.
1
Press the STEREO key to switch to stereo playback
mode.
Press the STEREO key to switch between standard stereo
and beam stereo playback modes.
SUB
FL FR
C
SL SR
STEREO
BM STEREO
(beam stereo)
STEREO
BM STEREO
Standard stereo playback without using sound
beams.
Left and right channel sounds are output as
sound beams from the front left and right
channels. This expands the area to which
sound is output.