Samsung AR09JVSSEWKNED Service Manual page 62

9-2 Wireless Remote Control-Buttons and Display
Remote controller display
Set temperature/ Time (for
Low Battery warning
When the battery is exhausted, (
remote controller display. When the icon appears, change
the batteries. The remote controller requires two 1.5 V AAA
type batteries.
Storing the remote controller
When you do not use the remote controller for long time,
remove the batteries from the remote controller and store it.
• The signal may not be received properly if electronic
operating in the same space.
• other electrical products operate by the remote controller, call your nearest contact center.
9-2
Operation mode
indicator
Timer option) indicator
good'sleep indicator
Options indicator
• Make sure that the water does not get to the remote controller.
• Heat mode and the following function are displayed on the remote controller display but not
supported in this model.
) will be displayed in the
If
Transmit indicator
Low battery indicator
Fan speed indicator
Vertical air swing indicator
Settings indicator
Inserting the batteries
1. Push the lever as arrow indicates on the rear side of the
remote controller and pull up.
2. Insert two AAA batteries.
Check and match the "+" and "-" signs accordingly. Make sure
you have inserted the batteries in correct position.
3. Close the cover by place it back to its original position.
You should hear click sound when the cover is locked properly.
lamps such as inverter lamps are
Samsung Electronics