Amcrest Cloud Desktop Setup; Web Access Setup (Amcrestview.com) - Amcrest IP2M-843EW User Manual

When opening the camera's interface, the browser may prompt you to install a plugin. The
plugins are necessary for using the camera's interface. Click install to download the plugin,
and then click on the plugin installation file to install the plugin. If the browser prompts
you to allow the plugin to work on the computer, hit Allow to ensure the plugin can run
successfully.
The camera is now successfully set up for live viewing!
For quick and easy remote access on your PC or Mac, please use amcrestcloud.com
(section 4.5) or amcrestview.com
To setup advanced remote access via UPnP/DDNS or Port Forwarding see section 4.7.1 and
4.7.2.
For additional assistance, please contact us at www.amcrest.com or give us a call at 1-888-
212-7538. Step by step video tutorials available at

4.5 Amcrest Cloud Desktop Setup

Amcrest cameras can sync with Amcrest Cloud; a service that stores recorded video
streams to enable long-term storage. Amcrest Cloud also allows the user to easily find and
download recorded video for playback from any internet connected PC or Mac computer.
For more information on how to setup your camera on Amcrest Cloud on the web, visit
amcrest.com/cloudwebsetup
1. Connect the camera to power and wait 30 seconds for the camera to start-up and
initialize.
2. Using a web browser on your PC or Mac, visit
for a cloud account. Once registered, click the "Add Camera" button. Select
"Amcrest", give the camera a name, and enter the camera's SN (located on the
bottom of the camera), then click "Next".
3. On the settings page, you can adjust optional preferences for your camera. Once
settings have been adjusted, click "Finish". Your camera is now successfully set up for
cloud access and storage.
4. View your camera live or watch recorded clips using the menu button on the top of
the page. You can also use the Amcrest Cloud app on iOS and Android to add more
cameras, play recordings, and view your camera live, from anywhere. For more
information visit amcrest.com/support
5. For additional assistance, please contact us at www.amcrest.com or give us a call at 1-
888-212-7538. Step by step video tutorials available at
http://www.amcrest.com/videos

4.6 Web Access Setup (AmcrestView.com)

1. Connect the camera to power and wait 30 seconds for the camera to start-up and
initialize.
2. Using Internet Explorer or Safari, go to
account. You will be required to activate your account by e-mail (double-check
your spam folder).
3. Once activated, download and install the plugin for your web browser. The
installation of the plugin will require all web browsers to close.
(section 4.6).
http://www.amcrest.com/videos
or follow the steps provided below:
www.amcrest.com/cloud
www.AmcrestView.com
and register
and register an
14