Table of Contents
Advertisement
Insert the accessory between the two guide rods for
2.
a shelf position.
Wire rack
Push the wire rack in with the
curvature
word "microwave" must be at the
front at the appliance door.
Baking tray
Slide the tray in with the sloping
E.g. univer-
edge
sal pan or
baking tray
To place the accessory at shelf positions with pull-
3.
out rails, pull out the pull-out rails.
7 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
7.1 Carrying out the initial configuration
When the appliance is connected to the electricity sup-
ply for the first time or following a lengthy power cut,
you must configure the settings before you can use it. It
may take a few seconds for the settings to appear on
the display.
Note: You can also enter the settings using the Home
Connect assistant. In this case, press
last point in the initial configuration. If your appliance is
connected, follow the instructions in the app.
Setting the language
Use the rotary selector to select the required lan-
1.
guage.
Press
.
2.
a The next setting appears.
Setting the time
Turn the rotary selector to set the current time.
1.
Press
.
2.
a The next setting appears.
pointing downwards. The
towards the appliance door.
to go to the
Before using for the first time en
Wire rack
Position the accessory so that its
or baking
edge is behind the lug
tray
out rail.
Note: The pull-out rails lock in place when they are
fully pulled out. Gently push the pull-out rails back
into the cooking compartment.
Push the accessory all the way in, making sure that
4.
it does not touch the appliance door.
Note: Take any accessories that you will not be using
out of the cooking compartment while the appliance is
in operation.
6.4 Other accessories
You can purchase other accessories from our after-
sales service, specialist retailers or online.
You will find a comprehensive range of products for
your appliance in our brochures and online:
www.siemens-home.bsh-group.com
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance.
You can find out which accessories are available for
your appliance in our online shop or from our after-
sales service.
Setting the date
Use the rotary selector to set the current day.
1.
Press
.
2.
Use the rotary selector to set the current month.
3.
Press
.
4.
Use the rotary selector to set the current year.
5.
Press
.
6.
a The next setting appears.
7.2 Cleaning the appliance before using
it for the first time
Before using the appliance to cook food for the first
time, you must clean the cooking compartment and ac-
cessories.
Remove the product information and the accessor-
1.
ies from the cooking compartment. Remove any
leftover packaging, such as polystyrene pellets, and
any adhesive tape either in or on the appliance.
Wipe the smooth surfaces in the cooking compart-
2.
ment with a soft, damp cloth.
Press
to switch the appliance on.
3.
Apply the following settings:
4.
Type of heating
on the pull-
4D hot air
13
Advertisement
Table of Contents
