Table of Contents
Advertisement
1. Connect the power cord to the projector's power inlet.
2. Plug the power cord into an electrical outlet.
The projector's On/Standby light turns blue. This indicates that the projector is receiving power, but
is not yet turned on (it is in standby mode).
Note: With Direct Power On turned on, the projector turns on as soon as you plug it in.
3. Remove the lens cover, if necessary.
4. Press the power button on the projector or the remote control to turn on the projector.
The projector beeps and the Status light flashes blue as the projector warms up. After about 30
seconds, the Status light stops flashing and turns blue.
Warning: Never look into the projector lens when the laser is on. This can damage your eyes and is
especially dangerous for children and pets. When turning on the projector at a distance using the
remote control, make sure there is no one looking into the lens. Make sure no objects are blocking
the light from the projector lens. Objects blocking the lens for an extended time can melt and light
that is reflected back into the lens can cause the projector to malfunction.
91
Advertisement
Table of Contents
