Controlling A Networked Projector Using Crestron Connected - Epson EB-L770U User Manual

5. Set the Crestron Connected setting to On to allow the projector to be detected.
Note: Enabling Crestron Connected disables the Message Broadcasting feature in the Epson
Projector Management software.
6. Start your Web browser on a computer or device connected to the network.
7. Go to the Epson Web Control screen by entering the projector's IP address into the browser's
address box.
8. Select the Crestron Connected settings. See the Crestron Web site for details.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
Projector Network Settings - Network Menu

Controlling a Networked Projector Using Crestron Connected

Once you have set up your projector to use Crestron Connected, you can control and monitor projection
using a compatible web browser.
1. Start your web browser on a computer connected to the network.
2. Type the projector's IP address into the browser's address box and press the computer's Enter key.
Using Crestron Connected
82