Nikon Z 6II Reference Manual page 749

Wireless Remote Controllers
●
•
WR-R11b, WR-R10, and WR-T10 Wireless Remote Controllers
- When a WR-R11b/WR-R10 wireless remote controller is attached to the
accessory terminal, the camera can be controlled wirelessly using a
WR-T10 wireless remote controller.
- WR-R11b/WR-R10 wireless remote controllers can also be used to
control radio-controlled flash units.
- For synchronized release involving more than one camera, ready
multiple cameras with paired WR-R11b/WR-R10 units attached.
* When connecting the WR-R11b/WR-R10, be sure the cover for the
accessory terminal and the USB and HDMI connectors is fully open.
•
WR-1 Wireless Remote Controller: WR-1 units are used with WR-R11b/
WR-R10 or WR-T10 wireless remote controllers or with other WR-1
remote controllers, with the WR-1 units functioning as either
transmitters or receivers. When a WR-R11b/WR-R10 or a WR-1
configured as a receiver is connected to the camera accessory terminal,
a second WR-1 configured as a transmitter can be used to take pictures
and adjust camera settings remotely.
* When using a wireless remote controller with the WR-R10, be sure the
firmware for the WR-R10 and WR-1 have been updated to the latest
versions (WR-R10 firmware version 3.0 or later and WR-1 firmware
version 1.0.1 or later). For information on firmware updates, see the
Nikon website for your area. Consult a Nikon-authorized service
representative when updating the firmware for the WR-R10 from
versions prior to version 2.0 to version 3.0 or later.
Other Compatible Accessories
707