Non-CPU Lens Data
Record data for non-CPU lenses attached using an optional
mount adapter. Recording the focal length and maximum
aperture of non-CPU lenses allows them to be used with some
camera features normally reserved for CPU lenses, such as on-
board vibration reduction.
Option
[Lens number]
[Focal length
(mm)]
[Maximum
aperture]
Save Focus Position
If [On] is selected, the camera will save the focus position in
effect when the camera is turned off and restore it when the
camera is turned on.
•
The focus position may change due to changes in zoom or
ambient temperature.
•
This option applies only with autofocus Z mount lenses.
•
If [On] is selected, it may be some time before you can operate
the camera after turning it on.
B The Setup Menu: Camera Setup
466
Choose a lens identifier.
Enter the focal length.
Enter the maximum aperture.
G button U B setup menu
Description
G button U B setup menu