F6: Release Button To Use Dial - Nikon Z 6II Reference Manual

Hide thumbs Also See for Z 6II:

Table of Contents

f6: Release Button to Use Dial

Selecting [Yes] allows adjustments that are normally made by

holding a button and rotating a command dial to be made by

rotating the command dial after the button is released. This

ends when the button is pressed again, the shutter-release

button is pressed halfway, or the standby timer expires.

[Release button to use dial] applies to the E and S

[Release button to use dial] also applies to controls to which

certain roles have been assigned using Custom Settings f2 or

g2 [Custom controls] and f9 or g7 [Assign MB-N11 buttons].

The roles in question are indicated in the table below.

J [Choose image area]

8 [Image quality/size]

[White balance]

h [Set Picture Control]

[Active D-Lighting]

w [Metering]

A Custom Settings: Fine-Tuning Camera Settings

G button U A Custom Settings menu

Can be assigned using Custom

Table of Contents