Nikon Z 6II Reference Manual page 110

D
Photography and Movie Recording
•
You may notice the following in the shooting display. These
phenomena will also be visible in any photos or footage recorded with
the camera.
- Flicker or banding in scenes lit by such sources as fluorescent,
mercury vapor, or sodium lamps
- Moving objects in the display appear distorted (individual subjects
such as trains or cars moving at high speed through the frame may be
distorted, or the entire frame may appear distorted when the camera
is panned horizontally)
- Jagged edges, color fringing, moiré, and bright spots may appear in
the display
- Bright regions or bands may appear in scenes lit by flashing signs and
other intermittent light sources or when the subject is briefly
illuminated by a strobe or other bright, momentary light source
- Flicker occurring when power aperture is used during movie
recording
•
Note that noise (randomly-spaced bright pixels, fog, or lines) and
unexpected colors may appear if you use the X button to zoom in on
the view through the lens during filming.
•
When recording, avoid pointing the camera at the sun or other strong
light sources. Failure to observe this precaution could result in damage
to the camera's internal circuitry.
A
Using Zoom in Movie Mode
Press the X button to zoom in on the display in movie mode ( 0 62).
Pressing X during recording zooms the display in to 100%. Press W ( Q ) to
cancel zoom.
Shooting Movies ( b Mode)
68