NETGEAR WAX615-100NAS User Manual page 56

Insight Managed WiFi 6 AX3000 Access Point Model WAX615
8. Select the Insight network location with the root.
In most situations, the Insight app detects the node automatically. This process might
take a few minutes.
9. Do one of the following to add the node to the Insight network location:
• Automatically detected: If the node is automatically detected and listed in the
Insight Manageable Devices section, tap the icon for the node, and then tap the
ADD DEVICE button.
• Not automatically detected: If the node is not automatically detected, do the
following:
a. Tap the + icon in the top bar.
b. Do one of the following:
- Tap the SCAN BARCODE OR QR CODE button, and then scan the node's
code.
- Tap the Enter Serial Number and MAC address link, and then manually
enter the node's serial number and MAC address.
c. If prompted, name the node and tap the Next button.
The node attempts to detect and connect to the root that provides the strongest
WiFi signal in the Insight Instant Mesh WiFi network.
Note: The initial connection and configuration process might take up to 10 minutes.
The node might restart during the configuration process.
10. Wait for the node to go through the initial connection and configuration process
and for the Power/Cloud LED to stop blinking amber, green, and blue and to light
solid blue.
Note: The initial connection and configuration process might take up to 10 minutes.
The node might restart during the configuration process.
The Power/Cloud LED lights as follows during the initial connection and configuration
process:
• Blinking green: The node is attempting to detect a root.
• Solid green: The node is making its first connection with the root that provides
the strongest WiFi signal.
• Blinking amber slowly: The node is contacting the network router or DHCP
server to receive an IP address.
Install the Access Point in an
Insight Instant Mesh WiFi
Network
56 User Manual