NETGEAR WAX615-100NAS User Manual page 36

Insight Managed WiFi 6 AX3000 Access Point Model WAX615
• WPA3 Personal: This option allows only WiFi clients that support WPA3 to
connect to the SSID. Select this option if all WiFi clients are capable of supporting
WPA3. This option uses SAE encryption. In the Passphrase field, enter a new
passphrase for the WiFi network.
• WPA3/WPA2 Personal: This option allows both WPA2 and WPA3 WiFi clients
to connect to the SSID. This option uses AES and SAE encryption. WPA2 clients
use AES and WPA3 clients use SAE. In the Passphrase field, enter a new
passphrase for the WiFi network.
Note: After you complete the setup process, you can set up WPA2 Enterprise or
WPA3 Enterprise security with RADIUS servers. For more information, see Change
the authentication and encryption for a WiFi network on page 72.
8. Click the Apply button.
Your settings are saved. A pop-up window displays the IP address and the new WiFi
network and password (passphrase).
If you specified a static IP address, save the IP address information because you must
enter the IP address when you log in again.
If you changed the default country, the access point restarts.
Note: Do not close the page!
After a short period, the Dashboard page displays automatically. If the Dashboard
page does not display, for example, because you assigned a static IP address, see
the next step.
You can now customize the access point settings for your network environment.
Install the Access Point in Your
Network and Access It for Initial
Configuration
36 User Manual