NETGEAR WAX615-100NAS User Manual page 13

Insight Managed WiFi 6 AX3000 Access Point Model WAX615
Table 1. LED descriptions
LED Icon
Power/Cloud LED
LAN LED
2.4 GHz WLAN LED
Hardware Overview
Color Description
Solid amber initially and then blinking amber slowly: The access
point is starting or in the process of getting an IP address.
Solid green: The access point started up and functions either as a
standalone access point or as an Insight discovered access point that
is not connected to the Insight cloud-based management platform.
Solid blue: The access point functions in Insight mode and is
connected to the Insight cloud-based management platform.
Blinking amber fast: The access point is updating firmware or is
being reset to factory default settings.
Blinking multicolor: The access point is functioning as a node in an
Insight Instant Mesh WiFi Network and the mesh setup is in progress.
Solid amber during operation: The PoE power that the access point
received is not at the 802.3at (PoE+) level.
Off: No power is supplied to the access point.
Solid green: A 2.5 Gbps Ethernet link is detected on the LAN port.
Blinking green: 2.5 Gbps traffic activity is detected on the LAN port.
Solid amber: An Ethernet link at a speed lower than 2.5 Gbps is
detected on the LAN port.
Blinking amber: Traffic activity at a speed lower than 2.5 Gbps is
detected on the LAN port.
Off: Either no Ethernet device is connected to the LAN port or no
Ethernet link is detected.
Solid green: The 2.4 GHz WiFi radio is on but no clients are
connected.
Solid blue: One or more WLAN clients are connected to the 2.4 GHz
WiFi radio.
Blinking blue: Traffic is detected on the 2.4 GHz WiFi radio.
Off: The 2.4 GHz WiFi radio is off.
13 User Manual