Estimated Installation Times; Transfer And Reinstallation; Colortrac Z36 Scanner Installation - Canon Colortrac imagePROGRAF MFP Z36 Service Support Manual

Canon
D.

Estimated Installation Times

The table below indicates the estimated length of time needed to unpack and
install the imagePROGRAF MFP system. The estimated unpack and
installation times are based on a minimum of three (3) or more persons to
unpack and move the printer, and two (2) or more persons to install the printer.
The estimated installation times include the following:
•
Installation space preparation
•
Unpacking and positioning the printer (main unit) on a stand or table
•
Installing the Printhead, ink tanks, and connecting the power cable
•
Checking the printer operation and adjusting the printing position
Table 19 – Estimated Installation Times
imagePROGRAF TZ-30000 MFP Z36
imagePROGRAF TX-4100 MFP Z36/TX-3100 MFP Z36
imagePROGRAF TM-305 MFP Z36 / TM-300 MFP Z36
E.

Transfer and Reinstallation

There may be ink leakage or damage to the printer if it is moved after initial
installation. Refer to the User Manual for transit preparation, printer packing,
and reinstallation instructions.
F.

Colortrac Z36 Scanner Installation

Refer to the Colortrac Z Series Scanner Service Manual or Assembly Guide for
instructions to install the Z36 Scanner to the supported imagePROGRAF
Printer.
14
The Installation time includes the Printer with stand, Printhead, all ink tanks, Colortrac T36 Scanner, Colortrac T36 MFP Stand,
and All-In-One computer.
imagePROGRAF MFP Z36 Service Support Guide
imagePROGRAF MFP Z36 Service Support Guide
Description Estimated Time
40 minutes
85 Minutes
14
70 Minutes
June 2021
Page 19