Physical Specifications; Hba Specifications - HP StorageWorks A6826A Installation Manual

Physical specifications

Table 3 lists the HBA specifications.
Table 3

HBA Specifications

Type
Host bus
Fibre Channel specifications
Central processing unit (CPU)
RAM
NVRAM
Flash
Onboard DMA
Frame Buffers
Connectors
Form factor
Power Consumption (66MHz PCI-X Optic)
Single Channel
Dual Channel
10 HBA features
Specification
Conforms to PCI Local Bus Specification, Revision 2.2
Bus type: fiber optic media
Bus transfer rate:
200 Mb/s maximum at half duplex
400 Mb/s maximum at full duplex
Interface chip: ISP2312
Single-chip design that includes a RISC processor, Fibre Channel
protocol manager, PCI-XDMA controller, integrated
serializer/deserializer (SEREDES), and electrical transceivers that
can auto-negotiate a data rate of 1 Gb/s or 2 Gb/s.
256 KB per Fiber Channel Controller; Scalable to 4 MB
256 KB, field programmable
128 KB of flash ROM in two 64 KB, software selectable banks, field
programmable
Five-channel DMA controller: two data and one command, one
auto-DMA request, and one auto-DMA response.
Integrated 10 KB frame buffer FIFOs (6 KB receive and 4KB transmit)
for each data channel.
LC-style connector that supports non-OFC, multimode fiber optic
cabling using a small form factor optical transceiver module.
17.78 cm x 10.67 cm (7.0 in x 4.2 in)
~4.75 Watts
~10.5 Watts
Get other manuals https://www.bkmanuals.com